Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Dọc Laminar dòng sạch băng ghế dự bị
Một băng ghế sạch được lọc trên cùng hướng không khí được lọc HEPA thống nhất xuống trên các sản phẩm không nguy hiểm và bề mặt làm việc không gỉ.
Localized Product Protection
Laminar Flow Benches & Hoods
Give sensitive products a dedicated filtered-air workspace. Explore vertical and horizontal laminar flow benches, hoods and workstations with access, mounting and mobility options suited to your non-hazardous processes.
13benches, hoods and workstations
Compare 13 clean-air work zones
01Define whether the clean-air field must move vertically downward or horizontally toward the operator side.
02Provide the work envelope, operator count, access sides and any equipment that must fit inside the protected zone.
03Confirm whether the unit will be benchtop, floor-standing, ceiling-suspended, freestanding or mobile.
04State construction, cleanability, ESD, utility, sash and process-interface requirements before model selection.
How to Select Laminar Flow Benches & Hoods
Start with the operating task and site constraints, then compare the product direction that best matches the intended use.
| Buyer requirement | Product direction | Why it helps |
|---|---|---|
| General work at a fixed station | Vertical or Horizontal Laminar Flow Clean Bench | Select the airflow direction around the product geometry, operator access and room layout. |
| One or two defined operator positions | Single-Operator or Dual-Operator Clean Bench | Matches the protected work width and utility access to the expected occupancy. |
| Frequent wiping, aseptic preparation or ESD-sensitive handling | Stainless Steel, Aseptic or ESD-Safe Configuration | Uses construction and work-zone features suited to the identified cleaning or electrostatic-control need. |
| Use an existing table or keep the floor clear | Benchtop or Ceiling-Suspended Laminar Flow Hood | Creates local clean-air coverage without a complete floor-standing bench cabinet. |
| Cover an installed machine with open process access | Laminar Flow Canopy or Local Clean Air Workstation | Places a configurable downflow or local airflow footprint over the selected process. |
| Move the protected work zone between areas | Mobile Laminar Flow Hood or Mobile Laminar Flow Workstation | Combines filtered airflow with a lockable mobile frame or integrated wheeled work surface. |
Compare 13 Laminar Flow Benches & Hoods
Narrow your choices by the features that matter to your application. View specifications and add suitable models to your inquiry list for a tailored quote.
13 models shown
Dòng chảy ngang Laminar Clean Bench
Một máy trạm lọc phía sau quét không khí sạch theo chiều ngang qua các sản phẩm không nguy hiểm về phía trước mở mà không có phần lọc trên cùng trên công việc.
Bàn sạch dòng khí tầng cho một người vận hành
A compact one-person clean bench sized around a centered working position for routine non-hazardous preparation, inspection and assembly.
Bàn sạch dòng khí tầng cho hai người vận hành
A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.
Thép không gỉ Laminar Flow Clean Bench
Một băng ghế sạch hoàn toàn không gỉ với bề mặt khu vực làm việc hàn, radiused cho các cơ sở sử dụng chất khử trùng thường xuyên lau và yêu cầu xây dựng chống ăn mòn bền.
ESD-An toàn Laminar dòng sạch Bench
A clean-air electronics bench combining HEPA-filtered product protection with a grounded static-dissipative work surface and optional balanced ionization.
Tủ dòng khí tầng để bàn
A self-contained filtered hood that sits on an existing table to create a localized clean-air zone for small non-hazardous products and instruments.
Trần treo Laminar Flow Hood
An overhead HEPA-filtered hood suspended above process equipment to create a defined downward clean-air zone without floor-mounted supports.
Laminar dòng Canopy
A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.
Di động Laminar Flow Hood
Một vỏ không khí sạch có bánh xe có thể được đặt trên một bàn hoặc dụng cụ nhỏ gọn để cung cấp bảo vệ sản phẩm được lọc tạm thời.
Trạm làm việc lưu lượng laminar di động
Một băng ghế sạch hoàn chỉnh có bánh xe với bề mặt làm việc riêng, mô-đun bộ lọc quạt và các tiện ích được tổ chức cho các nhiệm vụ sạch sẽ di chuyển giữa các khu vực sản xuất.
Trạm làm việc vô trùng Laminar Flow
A cleanable open workstation that delivers unidirectional HEPA-filtered downflow over critical preparation steps performed inside a suitable cleanroom.
Trạm làm việc không khí sạch địa phương
A modular open-frame station that places filtered clean air over one selected process step without enclosing the surrounding production area.
No models match every selected filter.
Reset one or more filters to compare a broader group.
Reset one or more filters to compare a broader group.
Solutions for Your Application
Overcome the Challenges in Your Process
A laminar flow bench or hood should be selected around the protected product, airflow path and working access. These units support non-hazardous product protection; personnel or hazardous-material containment requires a suitable containment device instead.
Room drafts disturb the clean-air field at an open working face.Select the airflow direction, sash, side panels and opening arrangement around the actual operator movement and room layout.
Tall instruments block the filter face or create weak airflow zones.Match vertical or horizontal supply and the work-zone dimensions to the installed equipment envelope.
A fixed cabinet cannot reach changing production tasks.Compare a mobile hood, mobile workstation or open-frame local clean-air station.
Cleaning chemicals or ESD-sensitive work are incompatible with a general-purpose bench.Choose stainless construction or an ESD-safe configuration based on the identified operating requirement.
A localized process needs coverage without permanent floor-mounted supports.Use a ceiling-suspended hood or freestanding canopy coordinated with the process footprint and service access.
Tell Us What Your Application Needs
- Product or process being protected
- Required airflow direction
- Work-zone width, depth and height
- Operator count and access sides
- Benchtop, fixed, suspended or mobile installation
- Cabinet and work-surface material
- Sash, curtain, lighting and utility requirements
- ESD, cleaning and room-interface constraints
Plan Your Cleanroom Equipment Together
Before choosing Laminar Flow Benches & Hoods
Vertical units supply filtered air downward from above the work zone, while horizontal units move air from a rear filter wall toward the open front. Product geometry, operator access and room layout determine which arrangement is more suitable.
A standard clean bench is intended for non-hazardous product protection. Work involving hazardous aerosols, potent powders or biological risk requires equipment designed for the relevant containment task.
Ceiling-suspended and canopy formats can be coordinated around an existing process footprint, subject to available structure, service access and the required airflow field.
Provide the work envelope, airflow direction, access sides, operator count, room conditions, construction material, utilities and any equipment cut-outs.
Need Help Choosing a Laminar Flow Work Zone?
Share your product, work area dimensions and operator-access needs. Our team will help you choose a suitable clean-air workspace and prepare a quotation.
