Insulated WFI storage tank three-quarter view with heated vent housing

클린룸 유틸리티 시스템

WFI 저장 탱크

An insulated, drainable 316L stainless steel vessel for buffering Water for Injection in hot or periodically heat-sanitized recirculating systems.

Hot-WFI-ready insulated construction
Drainable 316L contact surfaces
Heated venting and sanitary instrumentation

견적 요청 제품 찾아보기

상품 소개

The WFI storage tank maintains useful system volume between generation and a continuously circulating distribution loop. Its drainable vessel geometry, hygienic internal finish and spray-cleaning arrangement reduce retained water, while insulation and a stainless outer jacket support hot storage or thermal sanitization strategies. Level and temperature instruments coordinate generation, recirculation and utility control without introducing unnecessary wetted branches.

주요 기능

316L stainless steel product-contact vessel

Insulated shell with cleanable stainless outer jacket

Drainable dished bottom and low-point outlet

Heated hygienic vent-filter housing option

Internal spray device for defined wetting coverage

Sanitary level and temperature instrumentation

Side manway for controlled inspection access

Support legs arranged for outlet and piping clearance

고객 제품 관심사

WFI storage must preserve hygienic conditions while managing temperature, air exchange, changing demand and full-system sanitization.

Stored WFI loses temperature during low demandSpecify continuous loop circulation with correctly sized insulation and a jacket or external heat exchanger matched to the thermal strategy.

Condensation compromises the vent-filter assemblyUse a drainable heated vent housing and controlled steam or electric tracing to keep the filter within its intended operating envelope.

Residual water remains in the tank after drainingCombine a dished bottom, central low-point outlet and drainable instrument branches with the installed vessel orientation.

Generation cycles do not follow plant demandUse continuous level measurement and independent alarm switches to coordinate still output, loop pump protection and operating reserve.

일반적인 응용 프로그램

Aseptic pharmaceutical manufacturingParenteral drug productionBiopharmaceutical processingVaccine and biologics facilitiesSterile formulation and equipment-rinse utilities

기술 매개변수

The vessel volume, thermal design and connection schedule are selected for loop return temperature, peak demand, sanitization method and installation constraints.

핵심 재료	316L stainless steel product-contact shell, heads, nozzles and internal fittings with hygienic insulation system
패널 두께	Inner vessel shell typically 2.0–8.0 mm according to diameter and design condition
유효 폭	Jacketed vessel diameter typically 700–2600 mm
최대 길이	Overall insulated vessel height typically up to 5500 mm
강철 면면 두께	Stainless outer insulation jacket typically 0.8–1.5 mm
코어 밀도	316L stainless steel density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at ambient temperature
표면 마무리	Hygienic mechanically polished or electropolished internal surface with satin stainless outer jacket
접합 유형	Orbital-weld-ready sanitary tube stubs with drainable clamp or welded instrument connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Hot-storage or ambient-storage configurationMineral wool or closed-cell insulationSteam, electric or hot-water vent heatingRotary spray head or fixed spray deviceLoad-cell, radar or pressure level measurementTemperature and conductivity transmittersPressure-vacuum protectionHeating jacket or external loop heat exchanger interface

Planning a WFI Storage Tank specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.