Touchless cleanroom door switch with illuminated infrared sensor

클린룸 도어, 창문 및 인터락 시스템

터치리스 클린룸 도어 스위치

An infrared activation sensor that opens an automatic cleanroom door when a hand approaches, without physical contact with a push plate.

Contact-Free Activation
Adjustable Detection Range
Visible Status Light
Relay Output

견적 요청 제품 찾아보기

상품 소개

The touchless cleanroom door switch uses reflected infrared energy to detect a hand within a selected near-field zone. A solid-state sensor and relay interface send the opening request to the automatic operator or access controller, while the illuminated face indicates standby and activation. Flush and surface-mounted versions provide a smooth front plate that is easier to wipe than a mechanical push button.

주요 기능

Near-field infrared sensing reduces contact with door-control surfaces during gloved circulation.

The detection distance can be adjusted to reduce unwanted activation from passing traffic.

Color-changing illumination provides immediate visual feedback when a request is registered.

A dry relay output interfaces with automatic operators, access controllers and interlock logic.

고객 제품 관심사

A touchless switch must react predictably to an intentional hand approach without triggering whenever someone walks nearby.

Mechanical push plates add another surface that gloved users repeatedly touch.Infrared detection registers a request before the hand reaches the plate.

A sensor with excessive range opens the door when people simply pass the entrance.The short detection zone is adjusted to the wall position and circulation path.

Users cannot tell whether the automatic operator received the command.The indicator changes color immediately when the relay output activates.

일반적인 응용 프로그램

Hands-free personnel entrancesHospital clean corridorsLaboratory airlocksFood-production hygiene zones

기술 매개변수

Typical enclosure dimensions and materials for a flush touchless cleanroom door switch are given below.

핵심 재료	Infrared sensor and FR-4 control board behind a polycarbonate or stainless front plate
패널 두께	Approximately 25–35 mm installed sensor depth
유효 폭	Approximately 85–90 mm front-plate width
최대 길이	Approximately 85–120 mm overall front-plate length
강철 면면 두께	1.2–1.5 mm for the brushed stainless-steel faceplate option
코어 밀도	Approximately 1850 kg/m³ for the FR-4 electronic laminate
열전도도 (Thermal Conductivity)	Approximately 0.25–0.35 W/(m·K) for the FR-4 control board
표면 마무리	Brushed stainless steel or smooth white/black polycarbonate with blue-green illumination
접합 유형	Flush electrical-box mounting or sealed surface housing with screw-terminal output
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

12–24 VDC supplyAdjustable short-range detectionFlush or surface housingBlue, green or dual-color indication

Planning a Touchless Cleanroom Door Switch specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.