Steam heating coil with black header and aluminum fin face

클린룸 HVAC 및 공기 처리 장비

증기 난방 코일

A framed finned-tube coil that condenses plant steam inside its tubes to provide high-capacity cleanroom air heating.

Latent-Heat Transfer
Steam Distribution Header
Positive Condensate Drainage
Serviceable Return Bends

견적 요청 제품 찾아보기

상품 소개

Steam enters a distribution header and flows through copper tubes surrounded by aluminum fins. As steam condenses, latent heat transfers rapidly to the air crossing the fin face and condensate exits through a lower return connection. Correct tube pitch, casing orientation and venting support drainage at part load, while a non-freeze steam-distributing pattern can be selected for cold outdoor-air duty.

주요 기능

Latent heat of condensation provides substantial air-temperature rise in a compact one- or two-row coil.

A properly sized steam header distributes vapor across the tube bank instead of concentrating flow at one circuit.

Lower condensate connections and pitched tubes reduce retained water and waterhammer risk.

Removable casing panels expose tube returns, vents and trap connections for inspection.

고객 제품 관심사

Steam coils need uniform distribution and unrestricted condensate removal to avoid noise, erosion and freeze damage.

Condensate pools in tubes during low-load operation.Pitched circuits and a low condensate header establish positive drainage to the steam trap.

Cold outdoor air freezes retained condensate in inactive tubes.A steam-distributing tube arrangement keeps vapor moving through the active heating tube.

Wet steam erodes the inlet header and creates noisy operation.Upstream separation and correctly sized header entry deliver dry steam at controlled velocity.

Dirty fins restrict airflow and reduce leaving temperature.Accessible wide fin spacing and removable face guards support careful coil cleaning.

일반적인 응용 프로그램

Cleanroom AHU winter heatingOutdoor-air preheat sectionsHospital ventilation systemsPharmaceutical drying airLaboratory make-up air

기술 매개변수

Typical physical ranges for a duct-mounted copper/aluminum steam coil are shown below.

핵심 재료	C12200 copper steam tubes with aluminum fins and carbon-steel or copper headers
패널 두께	1.5-2.0 mm galvanized steel coil casing
유효 폭	300-2400 mm active finned-face width
최대 길이	Up to 3600 mm overall coil casing length
강철 면면 두께	1.5-2.0 mm galvanized or 304 stainless casing
코어 밀도	Approximately 8940 kg/m³ for the C12200 copper steam-tube material
열전도도 (Thermal Conductivity)	Approximately 339 W/(m·K) for C12200 copper steam tubes at room temperature
표면 마무리	Natural aluminum fins with galvanized or stainless frame
접합 유형	Brazed tube-to-header joints with flanged casing and threaded or flanged steam ports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Standard or non-freeze steam-distributing circuitsCopper, steel or stainless headersAluminum, copper or coated finsOne- or two-row construction with custom fin spacing

Planning a Steam Heating Coil specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.