Three-shelf stainless cleanroom trolley with blue polyurethane casters

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 트롤리

An open Type 304 stainless service trolley with three reinforced marine-edge shelves, a continuously welded round-tube frame, twin push handles and four blue polyurethane swivel casters.

Three marine-edge shelves
Two-direction push handles
Crevice-reduced round-tube frame
Four blue polyurethane casters

견적 요청 제품 찾아보기

상품 소개

The stainless steel trolley carries small tools, sealed components and replenishment stock between controlled work areas while keeping every load level visible. Three solid Type 304 shelves are reinforced below and formed with a shallow marine edge that resists items sliding during movement. The round-tube frame is continuously welded and finished without open tube ends. Push handles at both ends allow the operator to change direction without turning the trolley in a narrow corridor, and four 125 mm blue polyurethane swivel casters include two total-lock brakes for stable parking.

주요 기능

Three independently reinforced solid shelves separate clean supplies while preserving immediate visual access.

Shallow marine edges restrain loose containers without creating deep corners around the shelf surface.

Twin rounded push handles support controlled movement from either end through narrow transfer routes.

Blue non-marking polyurethane wheels combine quiet rolling with two total-lock positions for loading stability.

고객 제품 관심사

Routine cleanroom transport needs open visibility, contained shelf loads and predictable maneuvering without exposed frame cavities or black-marking industrial wheels.

Loose trays migrate toward a shelf edge when the trolley crosses a threshold.Each solid shelf has a formed marine perimeter that limits lateral movement.

A single handle forces operators to turn a loaded cart in a confined corridor.Rounded handles at both ends permit immediate push control in either direction.

Open tube ends and bolted frame corners retain cleaning residue.Continuously welded round tubes use sealed ends and blended junctions.

Hard wheels transmit vibration and leave visible marks on resilient cleanroom flooring.125 mm blue polyurethane casters provide a compliant non-marking rolling surface.

일반적인 응용 프로그램

Cleanroom consumable replenishmentLaboratory tool transferPharmaceutical component movementMedical-device assembly supportControlled packaging material delivery

기술 매개변수

Typical configurable specifications for a three-shelf stainless cleanroom trolley are listed below.

핵심 재료	Type 304 stainless solid shelves, round-tube frame and push handles with blue polyurethane caster treads
패널 두께	1.2 mm solid shelf panels with welded underside reinforcement
유효 폭	900 mm usable shelf length
최대 길이	1000 mm maximum overall trolley length including push handles
강철 면면 두께	1.2 mm Type 304 shelf sheet; 1.5 mm round-tube wall
코어 밀도	7900 - 8000 kg / m 3 Type 304 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) 유형 304 스테인레스 스틸
표면 마무리	Uniform satin-brushed stainless surfaces with passivated welds and blue non-marking wheel treads
접합 유형	Continuously welded round-tube frame with reinforced marine-edge shelves and threaded caster-stem sockets
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Type 316L stainless constructionPerforated middle shelfRemovable blue shelf matsConductive casters and grounding chain

Planning a Stainless Steel Trolley specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.