Complete brushed stainless steel cleanroom door with welded frame

클린룸 도어, 창문 및 인터락 시스템

스테인레스 스틸 클린룸 문

A welded stainless steel doorset with a 50 mm insulated leaf, brushed non-porous faces and minimal visible fixings for chemically cleaned or washdown-controlled interiors.

304 or 316L Stainless Steel
Brushed Hygienic Finish
Welded Wrap-Around Frame
Heavy-Duty Cleanroom Hardware

견적 요청 제품 찾아보기

상품 소개

The Stainless Steel Cleanroom Door combines a rigid stainless leaf with a welded wrap-around frame made to suit the host wall thickness. Brushed 304 stainless steel is suitable for many controlled production areas, while 316L can be selected where chloride exposure or stronger cleaning chemistry requires additional corrosion resistance. A closed-cell polyurethane core supports the skins and limits hollow resonance without creating exposed organic edges.

주요 기능

Brushed stainless surfaces remain non-porous and do not depend on a painted topcoat.

Welded and polished frame corners reduce open seams around the structural opening.

A closed-cell core adds stiffness and limits moisture migration inside the leaf.

Purpose-built stainless hinges support wide clear opening angles and frequent operation.

Matching architraves, kick plates and glazing trims create a consistent metal finish.

고객 제품 관심사

Stainless doors are selected where surface corrosion, coating damage and difficult frame seams would shorten the service life of a conventional doorset.

Paint chips expose carbon steel after repeated impact and aggressive cleaning.Solid stainless facings retain corrosion resistance even when the brushed surface is locally marked.

Open frame mitres trap moisture and cleaning residue.Welded, dressed frame corners replace open mechanical joints at the visible perimeter.

Moisture entering a porous infill can swell or delaminate the leaf.Closed-cell polyurethane and capped edges isolate the internal construction.

Mixed-finish accessories create small corrosion points around a premium door.Stainless hinges, handles, trims and protection plates maintain material continuity.

일반적인 응용 프로그램

Sterile pharmaceutical processingBiotechnology washdown roomsHospital sterile support suites음식 및 음료 위생 구역Chemical-cleaning laboratories

기술 매개변수

Representative dimensions for a brushed stainless steel cleanroom doorset are listed below.

핵심 재료	Closed-cell rigid polyurethane foam
패널 두께	50 mm door leaf
유효 폭	Up to 1250 mm single-leaf clear opening
최대 길이	2400 mm maximum clear opening height
강철 면면 두께	1.0-1.6 mm 304 or 316L stainless steel
코어 밀도	40-45 kg/m³ closed-cell polyurethane
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) typical polyurethane core range
표면 마무리	240-grit or No. 4 brushed stainless steel
접합 유형	Welded wrap-around frame with continuous elastomer perimeter seal
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

316L stainless constructionFlush double-glazed vision panelFull-height stainless kick protectionElectric closer or flush maglock

Planning a Stainless Steel Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.