Concealed cleanroom ceiling grid support system on a neutral studio background

클린룸 벽 및 천장 시스템

숨겨진 클린룸 천장 그리드

A concealed carrier framework that supports modular cleanroom ceiling panels without leaving a prominent exposed grid on the room side.

Flush room-side ceiling appearance
Modular 600 and 1200 mm layouts
Individually removable ceiling panels
Suspended galvanized-steel support structure

견적 요청 제품 찾아보기

상품 소개

The Concealed Cleanroom Ceiling Grid creates a stable overhead framework behind a flush panel surface. Folded galvanized-steel carriers and coordinated cross-members distribute ceiling loads to threaded suspension points, while the hidden arrangement reduces visible ledges inside the controlled area. Modular spacing can accommodate removable ceiling panels, lights, terminal filters and service access points without turning the supporting structure into a dominant visual element.

주요 기능

Hidden primary carriers preserve a clean, continuous ceiling plane.

Regular module spacing simplifies the positioning of panels and ceiling services.

Demountable panel interfaces provide access above the ceiling without dismantling an entire bay.

Galvanized support sections resist routine corrosion in dry indoor ceiling voids.

Threaded suspension points allow accurate height adjustment during leveling.

고객 제품 관심사

A cleanroom ceiling must remain level, serviceable and visually clean while carrying panels and integrated equipment above the occupied space.

An exposed grid introduces visible ledges that interrupt a smooth hygienic ceiling.The structural carriers sit above the finished plane, leaving the room-side panel surface substantially flush.

Irregular framing makes filter, light and access-panel positioning difficult.A repeatable modular layout provides predictable bays for coordinated ceiling components.

Ceiling maintenance can require removing several neighboring panels.Individual demountable panels permit localized access to the ceiling void.

Small suspension variations can produce uneven panel joints across a large room.Adjustable threaded hangers allow the carrier network to be leveled before final panel installation.

일반적인 응용 프로그램

Pharmaceutical production room ceilingsMedical device assembly areasElectronics and semiconductor clean zonesLaboratory ceiling enclosuresFood and cosmetic controlled environments

기술 매개변수

The grid is configured around the selected ceiling module and suspension arrangement. The values below describe commonly used concealed cleanroom ceiling construction rather than an insulated panel specification.

핵심 재료	Folded galvanized-steel carrier profiles with aluminum perimeter members
패널 두께	N/A — not applicable to a ceiling support grid
유효 폭	600 or 1200 mm modular grid spacing
최대 길이	3600 mm typical carrier section
강철 면면 두께	N/A — not applicable to a concealed carrier framework
코어 밀도	N/A — not applicable to an open support framework
열전도도 (Thermal Conductivity)	N/A — not applicable to a non-insulating grid system
표면 마무리	Zinc-coated steel; visible aluminum trim can be powder-coated
접합 유형	Concealed carrier-and-cross-grid connection with adjustable threaded suspension
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

600 × 600 mm ceiling module1200 × 600 mm ceiling modulePowder-coated visible perimeter trimService openings for lights, filters and access panels

Planning a Concealed Cleanroom Ceiling Grid specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.