Three-quarter view of a white cleanroom HEPA terminal housing with top blue duct collar

FFU 및 터미널 공기 정화 장비

클린룸 HEPA 터미널 하우징

A fanless welded ceiling filter box that connects the supply duct to a sealed HEPA or ULPA panel and cleanroom diffuser with room-side service access.

Fully Welded Fanless Housing
Top or Side Duct Collar
Gel-Seal Filter Option
교환 가능 디프로저 면

견적 요청 제품 찾아보기

상품 소개

The cleanroom HEPA terminal housing forms the final sealed transition between a central air-supply duct and the cleanroom. Its fully welded steel plenum accepts a top or side collar, while an internal clamping frame holds a HEPA or ULPA panel against a gasket or gel knife edge. A hinged or quick-release room-side diffuser provides access to the filter, pressure port and upstream challenge connection. Because the module contains no fan, airflow is governed by the upstream air-handling system and an optional inlet damper, making it well suited to ducted pharmaceutical, laboratory and healthcare ceilings.

주요 기능

Fully welded plenum seams create a continuous pressure boundary between the duct collar and filter seat.

Top, side-round or side-rectangular inlet positions accommodate different ceiling-clearance conditions.

Room-side clamps retain the filter evenly and allow replacement without removing the terminal box.

Interchangeable perforated, swirl or adjustable-nozzle faces adapt the discharge pattern to the room layout.

고객 제품 관심사

A terminal filter box must prevent bypass leakage, fit restricted ceiling space and remain serviceable without disturbing the supply duct.

Folded or spot-welded plenum seams can leak unfiltered supply air around the final filter.Continuous welded seams maintain a sealed pressure path from the duct inlet to the filter seat.

A centred top collar conflicts with structural members or shallow ceiling services.Alternative top, side-round and side-rectangular connections allow the plenum to fit the available space.

Uneven filter clamping leaves local gaps around a gasket or gel channel.Multiple room-side retaining points apply balanced compression around the complete frame.

One fixed diffuser pattern causes draughts or poor room mixing after a layout change.Replaceable front plates provide perforated vertical, swirl or adjustable radial discharge patterns.

일반적인 응용 프로그램

제약용 클린룸 천장Hospital isolation and procedure rooms생명공학 연구소 (Biotechnology Laboratories)Food and beverage controlled areasDucted microelectronics clean zones

기술 매개변수

Typical material and size ranges for a ducted cleanroom HEPA terminal housing are listed below.

핵심 재료	Fanless welded steel plenum with aluminium-frame micro-glass HEPA or ULPA mini-pleat filter
패널 두께	250-500 mm housing depth excluding duct collar
유효 폭	305-1220 mm nominal filter and diffuser width
최대 길이	Up to 1220 mm standard terminal housing length
강철 면면 두께	1.0-1.5 mm fully welded powder-coated or stainless-steel plenum
코어 밀도	Approximately 90-120 kg/m³ compacted density of the HEPA or ULPA pack seated in the terminal housing
열전도도 (Thermal Conductivity)	Approximately 0.035-0.043 W/(m·K) for the final-filter pack seated in the cleanroom terminal housing
표면 마무리	White epoxy-polyester powder coat or brushed 304 stainless steel
접합 유형	Welded duct plenum with room-side compression gasket or knife-edge gel-seal filter clamp
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Top-round, side-round or side-rectangular inletHEPA H13-H14 or ULPA filterPerforated, swirl or adjustable-nozzle diffuserRoom-side pressure and aerosol test ports

Planning a Cleanroom HEPA Terminal Housing specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.