Glazed stainless cleanroom garment storage cabinet with hanging rail

클린룸 가구 및 스테인레스 스틸 제품

클린룸 의류 보관 캐비닛

A shared Type 304L stainless gowning cabinet with glazed double doors, a full-width hanging rail and lower shelves for organized bulk garment storage.

Full-width closed-loop hanger rail
Twin glazed gasketed doors
Lower folded-garment shelves
300 mm raised floor clearance

견적 요청 제품 찾아보기

상품 소개

The cleanroom garment storage cabinet provides one shared enclosure for coveralls, frocks and folded accessories rather than dividing capacity by person. A full-width stainless hanging rail spans the upper chamber, while two lower stainless shelves store folded garments and packaged hoods. Twin laminated-glass doors reveal available stock before access and close against continuous blue silicone seals using a central three-point compression lock. The 1.5 mm Type 304L enclosure has a sloped roof, smooth internal returns and 300 mm-high stainless legs that leave the floor beneath the cabinet open for cleaning.

주요 기능

The full-width closed-loop rail accepts long cleanroom coveralls without internal locker partitions interrupting the hanging zone.

Two lower stainless shelves separate folded hoods and packaged garments from shoes or floor-level splash exposure.

Laminated glazed doors show garment quantity and rail occupancy before the cabinet is opened.

A linked three-point compression closure pulls the paired doors evenly onto continuous blue silicone seals.

고객 제품 관심사

Bulk clean garments require high hanging capacity and quick stock visibility without the wasted width of individual personnel partitions.

Individual lockers consume excessive width when garments are issued from a common controlled stock.One uninterrupted hanging rail uses the full cabinet width for shared coveralls and frocks.

Opaque doors force staff to open the cabinet repeatedly to check garment sizes and remaining quantity.Twin laminated viewing panels expose rail occupancy and shelf stock while the enclosure stays closed.

Folded hoods and packaged accessories become mixed with garments hanging to full length.Two lower stainless shelves establish separate, visible zones below the suspended garments.

A low plinth traps lint and prevents direct access to the floor behind the door swing.Four 300 mm stainless legs expose the complete cabinet footprint for inspection and wiping.

일반적인 응용 프로그램

Central clean garment storesPharmaceutical gowning-room stock pointsBiotechnology clean apparel stagingMedical-device gowning apparel stockroomsClean laundry issue and return areas

기술 매개변수

Typical configurable specifications for a shared stainless cleanroom garment storage cabinet are listed below.

핵심 재료	Type 304L stainless steel welded enclosure with laminated-glass twin doors, full-width hanger rail and two lower stainless shelves
패널 두께	1.5 mm cabinet body, framed doors and internal shelves
유효 폭	1000–1200 mm overall cabinet width
최대 길이	2080 mm maximum height at the rear of the sloped roof
강철 면면 두께	1.5 mm Type 304L stainless enclosure, door frames and shelf pans
코어 밀도	7900–8000 kg/m³ for Type 304L stainless steel
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for Type 304L stainless steel
표면 마무리	Brushed dull-polish stainless with clear laminated glazing, blue silicone door seals and black central lock
접합 유형	Continuously welded carcass with gasketed glazed double doors, concealed hinges, linked three-point lock and removable shelf supports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Full-width rail or half-rail and shelf layoutPerforated shelves for vertical airflowOpaque stainless or static-dissipative clear doorsTop-mounted filtered-air module

Planning a Cleanroom Garment Storage Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.