Cleanroom AGV with raised lift platform in front three-quarter view

클린룸 재료 취급 및 보관

클린룸 AGV

A stainless cleanroom automated guided vehicle with laser navigation, safety sensing and an integrated scissor-lift docking platform.

Encapsulated stainless body supports low-particle guided transport
Integrated lift platform automates docking and load exchange
Multi-zone safety sensing protects planned travel routes

견적 요청 제품 찾아보기

상품 소개

The vehicle uses an encapsulated stainless body, guided navigation sensor, protective laser fields and a powered lift platform for repeatable material transfer. Recessed drives and contact charging reduce exposed mechanisms, while rounded surfaces and sealed panels support clean-area maintenance.

주요 기능

Guided navigation follows validated routes between defined stations.

Scissor lift aligns the top docking plate with transfer equipment.

Front safety lasers and ultrasonic sensors detect obstacles.

Encapsulated drives and electronics limit exposed particle sources.

Automatic charging contacts support scheduled unattended operation.

고객 제품 관심사

Manual cart movement introduces traffic variability, repeated handling and inconsistent alignment at automated process stations.

Inconsistent station approachGuided navigation and docking targets provide repeatable positioning.

Height mismatch during exchangeThe powered scissor platform aligns the load interface.

Collision risk on shared routesSafety laser windows, ultrasonic sensors and bumper zones monitor obstacles.

Exposed drive contaminationEncapsulated panels isolate primary drive and electrical components.

일반적인 응용 프로그램

Repeatable transport of carriers, trays, sealed totes and process fixtures along defined cleanroom production and logistics routes.

기술 매개변수

Vehicle size, payload, navigation method, lift stroke and docking pins are matched to the facility layout and carrier interface. Route controls and safety fields are configured through the plant automation system.

핵심 재료	Type 304 stainless encapsulated body with electric lift, battery drive and safety sensors
패널 두께	2.0–3.0 mm external body and service panels
유효 폭	600–1000 mm platform width
최대 길이	Up to 1800 mm vehicle length
강철 면면 두께	1.5–2.5 mm
코어 밀도	7930 kg / m 3 공칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	실온에서 약 16. 2 W / (m · K)
표면 마무리	Fine-brushed and passivated stainless steel with smooth sealed covers
접합 유형	Bolted sealed body with recessed drive modules, electric scissor lift and locating-pin docking plate
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Laser, magnetic or QR guidance, alternate lift strokes, roller or fork top modules, ESD configuration, contactless charging, fleet software and custom docking pins.

Planning a Cleanroom AGV specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.