Clean steam generator complete three-quarter view with horizontal vessel, blue feedwater pump and control cabinet

클린룸 유틸리티 시스템

깨끗한 증기 발생기

A horizontal unfired generator that uses plant steam in a removable U-tube bundle to produce clean steam from separately treated feed water.

Indirect steam-to-steam separation
Serviceable horizontal U-tube bundle
Automated pressure and level control

견적 요청 제품 찾아보기

상품 소개

The Clean Steam Generator keeps the plant-steam circuit physically separate from the secondary water and clean-steam space. Primary steam condenses inside a removable U-tube bundle, transferring heat into RO, demineralized or otherwise suitably treated feed water held in the horizontal generator vessel. A level transmitter regulates make-up water while clean-steam pressure modulates primary heat input, allowing the packaged unit to follow process demand without introducing boiler-water treatment chemicals into the secondary steam path.

주요 기능

Indirect unfired steam generation

Horizontal 316L secondary vessel

Removable U-tube heating bundle

Modulating primary-steam control

Continuous secondary-water level sensing

Dedicated clean-steam safety valve

Automatic blowdown interface

Touchscreen alarms and remote signals

고객 제품 관심사

A clean-steam package must isolate boiler additives, control secondary-water inventory and remain serviceable while responding to changing sterilizer or direct-contact process demand.

Plant-steam treatment chemicals cannot enter a direct-contact processUse a closed primary U-tube bundle so only heat crosses into the separately supplied secondary water.

Intermittent sterilizer loads cause clean-steam pressure swingsModulate the primary-steam control valve from secondary pressure while retaining useful steam volume in the horizontal vessel.

Poor secondary-water control promotes carryover or low-level tripsRegulate make-up flow continuously from the vessel level transmitter and configure high- and low-level alarms.

Scale or fouling increases bundle inspection downtimeMatch feed-water quality and blowdown practice to duty, then withdraw the bolted U-tube bundle through the service end.

일반적인 응용 프로그램

Healthcare autoclaves and washer sterilizersFood and beverage direct steam injectionCosmetic process-vessel heatingBioprocess equipment sanitizationAdditive-free clean humidification

기술 매개변수

Generator volume, U-tube area, clean-steam pressure, feed-water pressure, blowdown arrangement and control-valve duty are selected from the required load profile and available plant utilities.

핵심 재료	316L stainless steel clean-steam vessel, U-tube bundle and secondary piping
패널 두께	Generator shell typically 4.0–12.0 mm
유효 폭	Packaged skid width typically 1400–2600 mm
최대 길이	Complete packaged skid length typically up to 3050 mm
강철 면면 두께	Control enclosure and skid sheet typically 1.5–3.0 mm
코어 밀도	316L stainless steel density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at ambient temperature
표면 마무리	Polished clean-steam wetted surfaces with satin-finished external stainless steel
접합 유형	Bolted removable tube-bundle head, welded secondary piping and hygienic clamps at service instruments
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

RO or demineralized feed-water configurationPneumatic or electric primary control valveIntegrated feed-water pumpAutomatic conductivity blowdownFeed-water preheating or degassingClean-steam separatorInsulated vessel and hot piping

Planning a Clean Steam Generator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.