Graphite cement-filled steel raised floor panel on pedestals and stringers

클린룸 바닥 시스템

시멘트 충전 강철 상승 액세스 바닥

A welded steel-shell access panel with cementitious infill for high stiffness, rolling-load capacity and repeatable access to underfloor utilities.

Welded Steel Construction
Dense Cementitious Infill
Heavy Rolling-Load Support
Removable Service Modules

견적 요청 제품 찾아보기

상품 소개

Cement-filled steel raised access flooring is formed from a cold-rolled steel top sheet welded to a structural domed bottom pan, then filled internally with cementitious material. The composite panel combines the tensile strength of steel with a dense core that limits drumming and improves local stiffness. An epoxy coating protects the bare shell, and optional resilient finishes can be factory bonded to the top. Panels locate on pedestals or a stringered understructure, allowing equipment-room services to remain accessible throughout the floor life.

주요 기능

Perimeter and dome welds make the top sheet and formed bottom pan act as a single structural shell.

Cementitious infill increases stiffness and reduces hollow metallic sound under foot and rolling equipment.

Epoxy-coated steel surfaces protect the panel during handling and service in dry technical environments.

Heavy stringer configurations distribute concentrated and rolling loads across multiple pedestal positions.

고객 제품 관심사

Equipment rooms need removable flooring that remains stiff under rolling cabinets and concentrated feet without becoming noisy or unstable.

Unfilled metal panels drum and flex perceptibly under pedestrian traffic.Dense cementitious infill damps the hollow sound and supports the welded steel skins.

Rolling racks damage low-grade panel edges and create permanent rocking.Formed steel edges and the selected stringer grade spread repeated wheel loads across the understructure.

Service penetrations compromise a fixed concrete floor and are difficult to relocate.Modular panels can be lifted, replaced or prepared with factory-coordinated cable cutouts.

Bare unprotected steel begins to rust after transport or minor site moisture exposure.The welded shell receives a corrosion-resistant epoxy or galvanized protective finish.

일반적인 응용 프로그램

Cleanroom mechanical support areasEquipment and control roomsData centers and server roomsIndustrial laboratory utility spacesElectrical and communications rooms

기술 매개변수

Representative construction data for a heavy-duty cement-filled steel access-floor panel are shown below.

핵심 재료	Cementitious infill enclosed by a welded cold-rolled steel top sheet and domed bottom pan
패널 두께	35–41 mm typical bare structural panel depth
유효 폭	600–610 mm nominal modular panel width
최대 길이	600–610 mm nominal modular panel length
강철 면면 두께	0.7–1.2 mm top and formed bottom steel sheets, selected by load grade
코어 밀도	Approximately 1900–2200 kg/m³ for the internal cementitious fill
열전도도 (Thermal Conductivity)	Approximately 0.8–1.4 W/(m·K) for the cementitious infill
표면 마무리	Corrosion-resistant epoxy-painted or galvanized steel with optional bonded resilient covering
접합 유형	Removable corner-supported panel on steel pedestals with freestanding or bolted-stringer retention
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Bare epoxy-painted or galvanized panelFactory-bonded HPL, PVC or rubber finishMedium, heavy or extra-heavy structural gradeStringers, cable grommets and equipment cutouts

Planning a Cement-Filled Steel Raised Access Floor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.