Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de contrôle des salles blanches et de surveillance environnementale
Alarme sonore et visuelle
A combined LED beacon and electronic sounder that delivers unmistakable cleanroom warning or alarm indication from one smooth wall-mounted device.
- High-Intensity LED Beacon
- Selectable Audible Tones
- Independent Sound and Light Inputs
- Smooth Wall-Mount Housing
Introduction de produit
The audible and visual alarm combines a high-visibility LED beacon with an electronic sounder in a compact enclosure. Separate or common control inputs allow light, sound or both to operate according to alarm priority. Selectable tones and volume settings help distinguish cleanroom environmental alarms from fire, process or equipment signals when a defined site convention is used. A smooth white body and colored lens mount to walls, ceilings or equipment while protected cable entry keeps field wiring away from the clean face.
Key Features
Selectable tones assign a distinctive sound pattern to the intended alarm function.
Independent inputs allow a warning light before escalating to combined sound and light.
A compact smooth enclosure suits clean walls and equipment surfaces.
Préoccupations du client produit
Combined alarms must be noticeable without creating conflicting sound patterns or excessive nuisance volume in occupied cleanrooms.
The alarm sound is confused with unrelated building signals.A documented distinctive tone separates the cleanroom condition from other alarm functions.
A bright beacon cannot be seen from every work position.Broad lens geometry and considered mounting improve visual coverage of the occupied area.
Every warning activates maximum sound immediately.Separate inputs allow staged visual warning followed by audible escalation.
Cleaning spray enters an exposed cable opening.Rear or sealed gland wiring keeps the front and cable entry protected.
Les applications typiques
Room pressure alarmsGas detection warningsEquipment fault indicationUtility and leak alarms
Paramètres techniques
Typical materials and dimensions for a combined cleanroom LED beacon sounder are listed below.
| Matériaux de base | High-brightness LEDs and piezoelectric sounder in polycarbonate lens and flame-retardant polymer body |
|---|---|
| Panneau épaisseur | 65-110 mm device depth |
| Largeur effective | 90-160 mm housing width or diameter |
| Longueur maximale | Up to 220 mm overall dimension |
| Acier face épaisseur | 0-1.0 mm; optional stainless mounting plate |
| Densité Core | 1180-1220 kg/m³ for polycarbonate body and lens |
| Conductivité thermique | 0.19-0.22 W/(m·K) for polycarbonate components |
| surface finie | Smooth white body with red or amber translucent lens and black acoustic grille |
| Type joint | Wall or ceiling base with gasketed lens joint and sealed rear cable entry |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Red, amber, green or blue lensMultiple selectable tonesIndependent sound and light inputsWall or ceiling mount
Planning a Audible and Visual Alarm specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
