Industrial ionizing air gun with stainless nozzle yellow trigger status lamp and coiled hose

ESD und antistatische Produkte

Ionisierende Luftpistole

The Ionizing Air Gun is a handheld point-of-use tool that combines compressed air with balanced ion output for controlled static neutralization and particle blow-off.

Focused ionized airflow neutralizes charge while removing particles from sensitive components.
Lightweight pistol grip and trigger give the operator precise point-of-use control.
Combined air and power connection keeps the hose route compact at assembly and inspection benches.

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

This gun uses a static-dissipative polymer body, stainless-steel nozzle and guarded emitter outlet to direct ionized clean dry air at a selected target. The yellow trigger starts airflow, while a green status lamp gives immediate operating feedback. A rear adjustment permits the delivered air volume to be matched to delicate parts or heavier contamination. The flexible combined hose exits through a reinforced grip strain relief and terminates in a quick-connect fitting for connection to the specified controller and air supply.

Key Features

Focused nozzle reaches recesses, fixtures and localized contamination that a broad blower cannot target.

Balanced ion generation removes charge before particles are displaced by the air stream.

Ergonomic trigger and textured grip support repeated inspection and assembly tasks.

Stainless nozzle resists wear and can accept alternative diffuser or filter accessories.

Status lamp confirms ionization operation at the hand tool.

Adjustable airflow reduces the risk of moving lightweight components.

Flexible static-dissipative hose integrates the supply route with strain relief at the grip.

Kunden Produktbedenken

Conventional compressed air can increase electrostatic charge and cause particles to reattach, so cleaning needs controlled ionization and a nozzle suitable for the actual target.

Dry-air blow-off leaves insulating parts charged after particles are removed.Balanced ions neutralize surface potential during the same trigger-controlled cleaning pass.

Broad airflow cannot reach small pockets, fixtures or connector cavities.The straight focused nozzle directs ionized air into localized process areas.

Excess pressure can displace small components or damage delicate surfaces.Rear airflow adjustment allows the delivered volume to be reduced for sensitive work.

Operators cannot easily tell whether ionization is active.The green status lamp provides visible confirmation at the hand tool.

Separate air and electrical leads tangle around the work area.The combined flexible hose consolidates the connection route and protects it with grip strain relief.

Typische Anwendungen

PCB and electronic-assembly particle removal.Semiconductor package and tray cleaning.Optical-component and lens preparation.Medical-device assembly and packaging.Molded-plastic part cleaning before inspection.Static-sensitive repair, test and rework stations.

Technische Parameter

The representative configuration below is intended for clean dry air or nitrogen point-of-use blow-off. Nozzle pattern, hose length, inlet fitting, filtration, controller voltage and hands-free accessories can be selected for the process.

Core Material	Static-dissipative polycarbonate/ABS body with stainless-steel nozzle and emitter assembly
Panel Dicke	2.0–3.0 mm molded housing-wall thickness
Effektive Breite	80–150 mm focused ionized-air coverage width at normal working distance
Maximale Länge	Up to 350 mm overall gun and nozzle length
Stahl facing Dicke	1.0–1.5 mm stainless-steel nozzle-wall thickness
Kerndichte	1100–1300 kg/m³ static-dissipative polymer-body density
Thermische Leitfähigkeit	0.18–0.25 W/(m·K) for the molded polymer housing
Oberfläche Finish	Matte charcoal antistatic body with blue rear insert, yellow trigger and brushed-stainless nozzle
Gemeinsamer Typ	Trigger-controlled gun body with guarded emitter nozzle and integrated combined air/power hose connection
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Straight, wide-angle or focused diffuser tips.Clean dry air or nitrogen-compatible configuration.0.01 µm point-of-use filtration.Alternative hose lengths and quick-connect fittings.Optical sensor or foot-pedal actuation.Flexible hands-free mounting stand.Alternative controller input voltage.

Planning a Ionizing Air Gun specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team