Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Hệ thống tiện ích phòng sạch
Bộ điều chỉnh áp suất không khí nén
A standalone high-flow pneumatic regulator that reduces fluctuating plant-air pressure to a stable downstream setpoint through a balanced poppet and rolling diaphragm, with a local gauge, locking adjustment and wall bracket.
- 0-12 bar adjustable outlet range
- 380 scfm reference flow for the 3/4-inch size
- Relieving rolling-diaphragm control
Giới thiệu Sản phẩm
The Compressed Air Pressure Regulator is a standalone air-line control device for branches that require repeatable downstream pressure without an integral filter bowl, dryer or lubricator. The selected P3Y 3/4-inch BSPP-class configuration uses a die-cast aluminum body, balanced brass/NBR poppet and NBR rolling diaphragm to respond to supply and demand changes. A black non-rising adjustment knob and metal lock ring secure the selected setpoint, while one front-mounted round pressure gauge reports outlet pressure and a steel angle bracket supports wall or machine mounting. The baseline version is self-relieving, allowing excess secondary pressure to vent through the regulator when the setpoint is reduced; non-relieving and reverse-flow/relieving arrangements remain application-selected alternatives. Upstream filtration and condensate removal are separate requirements because this product contains no filter element, bowl or drain.
Các tính năng chính
A rolling diaphragm provides a large sensing area for responsive and stable downstream-pressure regulation
The 3/4-inch straight-through body supports high branch flow without combining filtration or lubrication functions
A non-rising black adjustment knob keeps the installed envelope compact while the metal lock ring protects the setpoint
One local round gauge is mounted in a dedicated 1/4-inch gauge port for direct outlet-pressure indication
The second 1/4-inch gauge port is blanked but remains available for an alternate gauge orientation or pressure switch
Self-relieving construction releases trapped downstream pressure when the setpoint is reduced and flow conditions permit
A separate steel angle bracket supports wall or machine mounting without loading the connected air pipe
Các mối quan tâm về sản phẩm của khách hàng
Regulator performance depends on correct flow sizing, supply margin, relief selection, gauge range and clean upstream air rather than the nominal connection size alone.
A regulator sized only by pipe thread may show excessive downstream droop when several actuators demand air simultaneouslySelect from peak simultaneous flow at the minimum available inlet pressure and compare the manufacturer's flow curve at the required set pressure and allowable pressure drop.
Downstream pressure can remain trapped after the adjustment knob is turned downChoose the self-relieving configuration when controlled secondary venting is acceptable, or specify non-relieving construction and provide a separate downstream dump valve where venting through the regulator is prohibited.
Oil, rust or condensate can damage the poppet seat and rolling diaphragm or cause unstable regulationInstall suitable upstream particulate, coalescing and drying stages, then keep the regulator as a separate pressure-control component after those treatment devices.
Operators can unintentionally change a validated machine-air setpoint during routine workUse the lockable non-rising knob and metal lock ring, and reserve the optional tamper-resistant locking arrangement for controlled-access installations.
A poorly placed or incorrectly ranged gauge can hide pressure droop at the actual point of useMount the correctly ranged outlet gauge in the service-facing 1/4-inch port and verify regulated pressure under both static and peak-flow conditions.
Các ứng dụng điển hình
Stable branch pressure for cleanroom pneumatic actuators and control valvesMachine-side pressure reduction after central compressed-air treatmentControlled air supply to packaging, filling and assembly equipmentPressure management for laboratory instruments and test fixturesReduced-pressure utility air for blow-off, purge and positioning circuitsHigh-flow general pneumatic service where filtration and drying are provided upstream
Thông số kỹ thuật
The selected catalogue-scale identity is a standalone P3Y 3/4-inch BSPP-class gauge-equipped regulator, approximately 182 mm high, 90 mm wide and 94 mm deep. Parker publishes a 17.5 bar maximum inlet pressure, a 0-12 bar adjustment range and 380 scfm (179.3 dm³/s, approximately 10,758 L/min) reference flow for the 3/4-inch size under its stated 10 bar inlet, 6.3 bar set-pressure and 0.5 bar pressure-drop condition. The body provides two opposed main ports and two 1/4-inch gauge ports. The selected image identity fixes one 0-16 bar round outlet gauge in the front port, one blank plug in the opposite port, one black non-rising adjustment knob, one metal lock ring, one rear angle bracket and one integrated secondary-relief path through the relieving diaphragm/bonnet. Actual delivered pressure and flow depend on inlet pressure, setpoint, air temperature, upstream contamination control, piping loss and transient demand.
| Vật liệu lõi | Die-cast aluminum body, glass-filled polyamide bonnet and control knob, brass/NBR balanced poppet, NBR rolling diaphragm and NBR seals |
|---|---|
| Độ dày bảng điều khiển | Representative pressure-bearing aluminum body-wall sections typically 4.0-6.0 mm |
| Chiều rộng hiệu quả | 90 mm catalogue overall body width for the selected 3/4-inch P3Y-class regulator |
| Chiều dài tối đa | 182 mm catalogue overall height for the selected gauge-equipped regulator |
| Thép đối mặt với độ dày | Representative zinc-plated steel angle-bracket and metal lock-ring sections typically 2.0-3.0 mm |
| Mật độ lõi | Approximately 2700 kg/m³ representative density for the aluminum body alloy |
| Độ dẫn nhiệt | Representative aluminum body-alloy range 130-170 W/(m·K) at 20-25°C; exact casting alloy is supplier-selected |
| Kết thúc bề mặt | Natural light-gray matte aluminum body, black polymer bonnet and knob, white gauge dial with black bezel, and zinc-plated steel bracket and lock ring |
| Loại khớp nối | Two opposed G 3/4 BSPP inline ports, two G 1/4 gauge ports with one round gauge and one blank plug, rear angle bracket, metal knob lock ring and integrated secondary-relief vent |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
G 3/4 or G 1 BSPP main connections, with corresponding NPT versions where required0-12 bar or 0-16 bar secondary-pressure ranges according to the selected spring and gauge packageSelf-relieving, non-relieving or reverse-flow/relieving diaphragm arrangements for the circuit functionStandard non-rising or factory lockable adjustment-knob configuration0-10 bar, 0-16 bar or 0-20 bar gauge ranges selected to suit the required outlet setpointEither 1/4-inch gauge port may face the service aisle; the unused port receives a pressure-rated blank plugAngle bracket with metal lock ring or panel-mounting nut according to the installation methodCompatible upstream filter and dryer stages supplied as separate components rather than an integral combination unit
Planning a Compressed Air Pressure Regulator specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
