Trạm chuyển động vật
- Enclosed Mobile Transfer Cabinet
- Two Replaceable HEPA Filters
- Battery-Supported Airflow
- Three Adjustable Carrier Levels
Giới thiệu Sản phẩm
The Animal Transfer Station is a compact enclosed cart for moving occupied closed cages or transport boxes between vivarium holding rooms, procedure areas and quarantine routes. The illustrated configuration is a single mobile cabinet rather than an open cage-changing workstation. It has one wide front door with a clear tempered-glass observation window, a continuous black EPDM compression gasket and a positive latch. Three removable stainless-steel carrier shelves engage paired side rails inside the chamber. The lower service compartment contains two replaceable 203 mm HEPA filters, two low-noise blower modules and a rechargeable battery pack that keeps filtered airflow operating while the cart is disconnected for transit. A black control screen, one round differential-pressure gauge, one green status light and one internal white LED strip support routine monitoring and loading. Four lockable castors and one rear push handle allow controlled movement through animal-facility corridors. It is not an open animal cage changing station, biological safety cabinet or wall-mounted material pass box.
Các tính năng chính
Two independent 203 mm replaceable HEPA filters and two low-noise blowers maintain filtered recirculating airflow, while the onboard battery supports the air system between fixed power points.
Three removable carrier shelves locate on welded side rails, allowing shelf spacing to be adapted to different closed rodent cage and transport-box heights without adding loose floor platforms.
A differential-pressure gauge, compact control screen, green operating light and internal LED provide direct status and loading visibility without opening the observation door.
Các mối quan tâm về sản phẩm của khách hàng
Animal transport routes must preserve cage separation and ventilation while remaining compact, observable and stable during loading and corridor movement.
Các ứng dụng điển hình
Thông số kỹ thuật
Typical configurable construction values for the illustrated enclosed mobile animal transfer station are listed below.
| Vật liệu lõi | AISI 304 stainless-steel chamber, carrier shelves and rail frame with clear tempered-glass glazing, black EPDM door gasket and powder-coated lower equipment panel |
|---|---|
| Độ dày bảng điều khiển | 1.2 mm nominal stainless-steel chamber panel |
| Chiều rộng hiệu quả | 610 mm nominal cabinet width |
| Chiều dài tối đa | Up to 914 mm overall cabinet length |
| Thép đối mặt với độ dày | 1.2 mm nominal AISI 304 exterior facing |
| Mật độ lõi | 8000 kg/m³ for representative AISI 304 stainless-steel components |
| Độ dẫn nhiệt | 15 W/(m·K) for representative AISI 304 stainless steel at room temperature |
| Kết thúc bề mặt | Neutral silver brushed AISI 304, clear colourless glazing, charcoal-black gasket and controls, green status indicator and blue-white display graphics |
| Loại khớp nối | Single gasket-compression observation door with positive latch, removable rail-mounted carrier shelves and sealed bolted filter-service panels |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
Planning a Animal Transfer Station specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại