Thermal aerosol generator in three-quarter front view on a white background

클린룸 테스트 및 검증 장비

열 에어로졸 발생기

A controlled condensation aerosol generator that heats test liquid and forms a dense, repeatable aerosol for high-capacity filter challenge applications.

Dense repeatable condensation aerosol for large filter systems.
Independent thermal and flow control for adjustable output.
Insulated stainless construction with safety shutdown.

견적 요청 제품 찾아보기

상품 소개

This thermal aerosol generator heats a compatible aerosol liquid under controlled conditions, carries the vapor into a cooler region and forms a stable condensation aerosol. Independent temperature and carrier-flow controls allow output to be adjusted for demanding filter systems while maintaining repeatability. Insulated hot surfaces, over-temperature protection and a drainable stainless flow path support safer field use and straightforward maintenance.

주요 기능

Controlled heating produces dense aerosol without relying solely on compressed-air atomization.

Separate temperature and carrier-flow settings provide repeatable output adjustment.

Fast thermal response reduces stabilization time after a new setpoint is selected.

Insulated housing and over-temperature shutdown protect operators and internal components.

Stainless liquid path supports cleaning and compatible test-liquid changeover.

High-output configuration suits large air-handling units and demanding filter banks.

고객 제품 관심사

Thermal aerosol generation requires stable heat transfer, safe handling and controlled output across changing filter-system demands.

Heating can degrade test liquid or change output if temperature drifts.Closed-loop temperature control and a defined operating range stabilize vaporization without unnecessary overheating.

Hot external surfaces present a handling risk during field testing.Thermal insulation, guarded surfaces and cool-touch handles separate the operator from the heated core.

Condensed residue may accumulate in the outlet after shutdown.A controlled purge and drainable stainless path clear residual vapor before storage.

Large concentration changes can overload downstream measurement equipment.Independent carrier-flow and temperature settings allow output to be increased gradually to the required challenge level.

일반적인 응용 프로그램

Challenge testing of large HEPA filter banksAir-handling unit integrity testingFilter loading and separator-development studiesGeneration of controlled condensation aerosols in laboratoriesHigh-output qualification work where atomizer capacity is insufficient

기술 매개변수

Typical configurable construction values are listed below; final thermal, flow and dimensional specifications depend on the selected generator capacity.

핵심 재료	Insulated stainless-steel saturator, heated vapor path, condensation section and regulated carrier-gas circuit
패널 두께	Typically 1.0–1.5 mm for the stainless protective enclosure
유효 폭	Approximately 250–450 mm according to thermal-output configuration
최대 길이	Approximately 450–750 mm including outlet and protective handle
강철 면면 두께	Typically 1.0–1.5 mm stainless steel
코어 밀도	Approximately 80–140 kg/m³ for the high-temperature mineral-fiber insulation surrounding the heated section
열전도도 (Thermal Conductivity)	Approximately 0.035–0.050 W/(m·K) for the high-temperature insulation layer
표면 마무리	Fine-brushed stainless steel with heat-resistant dark controls and insulated grip surfaces
접합 유형	Threaded fill port, regulated carrier-gas inlet and high-temperature stainless aerosol outlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Adjustable heating and carrier-flow rangesDEHS, PAO or other compatible liquid configurationIntegrated compressor or external inert carrier gasHeated outlet hoseRemote control and data interfaceInsulated transport frame

Planning a Thermal Aerosol Generator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.