Complete sterile cleanroom sampling swab in closed clear tube with blue cap

미생물 환경 모니터링 제품

무균 샘플링 스패

A gamma-sterilized, low-particle polyester swab in a closed tube system for microbial sampling of small and difficult-to-access cleanroom surfaces.

Low-Particle Knitted Tip
Closed Sampling System
Gamma-Sterilized Format
Hard-to-Reach Surface Access

견적 요청 제품 찾아보기

상품 소개

The Sterile Sampling Swab combines a knitted polyester tip, a rigid polymer shaft and a secure screw-cap tube in one controlled sampling assembly. The low-shedding tip reaches filling needles, tubing interfaces and equipment recesses that cannot be monitored effectively with contact plates. Premoistened and closed-incubation configurations reduce handling steps, while staged sterile wrapping supports transfer into controlled areas.

주요 기능

Knitted polyester provides effective pickup with low particle and fiber release.

A slim rigid shaft reaches narrow equipment features and irregular surfaces.

The cap-mounted swab returns directly to its tube after sampling to contain the specimen.

Gamma-sterilized, individually identified formats support traceable cleanroom use.

고객 제품 관심사

Swab monitoring must recover microorganisms from confined surfaces without adding fibers, compromising sterility or losing sample traceability.

Contact plates cannot reach narrow bores, curved fittings or recessed equipment features.The slender shaft and compact knitted tip access small, irregular and difficult-to-reach locations.

Dry swabs give inconsistent recovery from low-bioburden surfaces.A controlled premoistened format improves wetting and transfer from dry equipment surfaces.

Loose fibers can contaminate a critical process area.Knitted low-particle polyester limits lint compared with conventional wound-fiber tips.

Multiple transfer steps increase contamination and identification risk.The cap-mounted swab, closed tube and individual coding keep collection, transport and incubation together.

일반적인 응용 프로그램

Filling needle and nozzle samplingTubing connection monitoringEquipment recess surface checksIsolator and RABS environmental monitoring

기술 매개변수

Typical construction values for a sterile closed-system environmental-monitoring swab are listed below.

핵심 재료	Knitted polyester swab tip, polypropylene shaft and clear polypropylene tube
패널 두께	0.8-1.2 mm nominal tube wall
유효 폭	5-8 mm nominal swab tip width
최대 길이	Up to 165 mm overall closed length
강철 면면 두께	0.7-1.0 mm equivalent cap and tube component wall
코어 밀도	900-950 kg/m³ for polypropylene components
열전도도 (Thermal Conductivity)	0.10-0.22 W/(m·K) for polypropylene components
표면 마무리	Low-particle knitted white tip with smooth clear tube and blue ribbed cap
접합 유형	Threaded leak-resistant cap with integrally retained swab shaft
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Dry or premoistened tipSaline or selected neutralizing solutionSingle or staged sterile wrappingIndividual 2D-code identification

Planning a Sterile Sampling Swab specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.