Dual-channel ESD ground monitor with status panel sockets and grounding lead

ESD 및 정전기 방지 제품

ESD 지상 모니터

The ESD Ground Monitor continuously checks operator wrist-strap and worksurface grounding paths so an interruption can be identified while sensitive electronic assemblies are being handled.

Independently supervises two operator grounding paths and two ESD worksurfaces.
High-visibility status indicators make grounding faults easy to identify at the bench.
Dedicated common-ground connection supports an orderly workstation bonding layout.

견적 요청 제품 찾아보기

상품 소개

This compact dual-channel monitor combines separate operator and worksurface status circuits in a durable molded enclosure. The front panel groups the channel indicators, wrist-strap sockets, worksurface connections and common-ground stud in a clearly divided layout. A protective-earth lead with ring terminal provides a defined connection to the workstation grounding network, while side mounting hardware supports visible installation near the active work area.

주요 기능

Two independent operator channels support dual-operator benches.

Two worksurface channels supervise separate dissipative or conductive work areas.

Green and red visual indicators distinguish normal and fault conditions.

Dedicated common-ground stud organizes the reference-ground connection.

Front-access sockets simplify daily operator connection and inspection.

Compact side-mount enclosure preserves usable bench space.

고객 제품 관심사

A continuous monitor must distinguish operator and worksurface faults clearly without complicating the workstation grounding layout or obstructing routine bench work.

A wrist-strap failure remains unnoticed between periodic tester checks.Continuous operator-path supervision provides an immediate visual fault indication during work.

Two operators share a bench but cannot be evaluated independently.Separate channel circuits and indicators identify the affected operator position.

A disconnected worksurface ground can expose parts even when an operator remains grounded.Dedicated worksurface monitoring checks the bench path independently of the wrist strap.

Multiple leads create an unclear common-point-ground arrangement.A defined common-ground stud and ring-terminal lead organize the connection to protective earth.

Status information is difficult to see during production.A high-contrast front panel groups color-coded indicators directly above the related connection points.

일반적인 응용 프로그램

Semiconductor and electronics assembly workbenches.PCB inspection, repair and rework stations.ESD-protected packing and component-handling areas.Device laboratories and reliability-test benches.Clean manufacturing areas handling static-sensitive parts.

기술 매개변수

The representative configuration below describes a common dual-channel workstation monitor; alarm thresholds, connector formats, supply input and mounting arrangement can be selected for the intended ESD control program.

핵심 재료	Flame-retardant ABS enclosure with copper-alloy contacts and electronic monitoring assembly
패널 두께	2.0–3.5 mm molded enclosure wall thickness
유효 폭	150–220 mm enclosure width
최대 길이	Up to 3000 mm grounding-lead length
강철 면면 두께	0.8–1.2 mm equivalent thickness for stainless mounting and terminal hardware
코어 밀도	1030–1080 kg/m³ ABS resin density
열전도도 (Thermal Conductivity)	0.17–0.22 W/(m·K)
표면 마무리	Light-gray matte housing with black front panel and color-coded status indicators
접합 유형	Dual operator sockets and worksurface inputs connected to a common-ground stud and ring-terminal lead
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single-operator or dual-operator channel configuration.Single-wire or dual-wire wrist-strap compatibility.Adjustable or fixed operator alarm limits.Audible alarm with optional mute or remote indication.Bench-top, under-shelf or side-bracket mounting.Alternative supply input, plug and grounding-lead length.

Planning a ESD Ground Monitor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.