Industrial Humidification & Dehumidification Equipment
| Brand | ST |
|---|---|
| Humidity adjustment range | 10–95% RH |
| Humidity control range | 30–95% RH |
| Humidity control accuracy | ±3% RH |
| Operating temperature | 5–38 °C |
Specifications can be customized to your requirements.
Specify the quantity and configuration in your inquiry.
Fresh Air Duct Dehumidifier removes water vapour from ducted air to help control dampness, condensation and moisture exposure in occupied rooms, storage areas and production spaces. Its compressor refrigeration circuit cools the air so water condenses on the heat exchanger, then returns drier air to the duct system.
The cabinet can serve a planned fresh-air or recirculation arrangement, keeping the equipment out of floor-level work areas. Select extraction capacity for the incoming moisture load and check airflow, duct resistance and drainage together, so dry air reaches the intended rooms.
MODEL COMPARISON
| Model | Dehumidification (L/day) | Dehumidification (kg/h) | Circulating airflow (m³/h) | External static pressure (Pa) | Power supply | Maximum power | Applicable area (m²) | Dimensions, L × W × H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| ST-26G | 26 | 1.08 | 250 | 20 | 220 V / 50 Hz | 300 W | 30 | 642 × 336 × 240 | 20 |
| ST-56G | 56 | 2.3 | 500 | 30 | 220 V / 50 Hz | 960 W | 80 | 940 × 502 × 354 | 30 |
| ST-90G | 90 | 3.75 | 900 | 50 | 220 V / 50 Hz | 1600 W | 120 | 962 × 619 × 400 | 45 |
| ST-158G | 158 | 6.58 | 1200 | 50 | 220 V / 50 Hz | 2600 W | 200 | 962 × 619 × 400 | 50 |
| ST-8KG | 180 | 8 | 1800 | 50 | 220 V / 380 V | 3200 W | 250 | 1030 × 1100 × 510 | 80 |
| ST-10KG | 240 | 10 | 2000 | 50 | 220 V / 380 V | 4.9 kW | 300 | 1030 × 1100 × 510 | 115 |
| ST-15KG | 380 | 15 | 2500 | 80 | 380 V / 50 Hz | 7 kW | 400 | 1132 × 880 × 720 | 145 |
| ST-20KG | 480 | 20 | 4000 | 120 | 380 V / 50 Hz | 9.8 kW | 800 | 1141 × 1180 × 600 | 200 |
| ST-30KG | 720 | 30 | 5000 | 120 | 380 V / 50 Hz | 16 kW | 1000 | 1141 × 1160 × 780 | 240 |
| ST-40KG | 960 | 40 | 8000 | 120 | 380 V / 50 Hz | 22 kW | 1200 | 1350 × 1460 × 840 | 300 |
FEATURES
A reinforced compressor motor, overload protection, vibration and noise control, and resistance to cold and heat support the refrigeration cycle within the listed operating conditions. The compressor design also addresses energy use during moisture removal.
The controller allows a wider setting range than the humidity range it controls. Use the control range and accuracy when matching the unit to a room requirement.
Supply and return routing can distribute drying across the working area while keeping the cabinet clear of aisles. Leave access to service panels and a continuous route for condensate drainage.
APPLICATIONS
Limit moisture exposure around stored goods and packaging, allowing for humid outdoor air entering through doors and ventilation.
Reduce persistent dampness around materials and work areas where the process requires controlled humidity.
Treat the moisture load in a ducted ventilation system when floor space needs to remain available for occupants and equipment.
Circulate drier air through rooms affected by humid air and condensation, with a suitable drain and service access.
INSTALLATION AND SELECTION
FAQ
Outdoor air brings a changing moisture load. Size the unit for that air quantity and its temperature and humidity, together with the room load.
Duct length also depends on available static pressure, duct size and fittings. A model with more airflow but the same pressure rating does not automatically support a more restrictive duct network.
PROCUREMENT / INQUIRY
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.