Humidity sensing and control
Temperature and humidity sensors feed the electronic controller. Setting memory and humidity-controlled cycling reduce repeated adjustments when the unit is used for routine room drying.
PRODUCT / TECHNICAL DATA Industrial Humidification & Dehumidification EquipmentSpecifications / Configurations / Procurement
PRODUCT GALLERYST
Product view
Industrial Humidification & Dehumidification Equipment
Commercial Mobile Dehumidifier
Product specifications
| Brand | ST |
|---|---|
| Model | ST602A |
| Dehumidification at 27 °C / 60% RH | 35 L/day |
| Dehumidification at 30 °C / 80% RH | 60 L/day |
| Dehumidification at 35 °C / 90% RH | 73 L/day |
| Humidity adjustment range | 10%–98% RH |
| Control accuracy | ±3% RH |
| Body dimensions | 345 × 410 × 665 mm |
| Applicable area | 50–80 m² |
| Weight | 33 kg |
| Airflow | 300 m³/h |
| Refrigerant | R22 |
| Compressor | Brand-name compressor |
| Rated power | 600 W |
| High-temperature power | 725 W |
| Maximum power | 880 W |
| Rated voltage and frequency | 230 V AC / 50 Hz |
| Rated current | 3.1 A |
| Drainage | Direct drainage + pumped upward drainage |
Specifications can be customized to your requirements.
Request a quotation
Specify the quantity and configuration in your inquiry.
Commercial Mobile Dehumidifier removes excess moisture from storage rooms, workshops and enclosed building areas, helping limit damp packaging, condensation and the conditions that encourage mold. A fan draws room air over the cold evaporator, where water condenses; the condenser then reheats the dried air before returning it to the room.
The handle, large rear wheels and front casters let the unit move between work areas as drying needs change. Humidity-controlled cycling maintains a selected setting, while continuous operation supports ongoing moisture removal. Direct and pumped drainage give the collected water a route out of the room without relying on repeated manual emptying.
FEATURES
Practical controls and condensate handling
Continuous or cycling operation
Continuous mode suits an active drying task; humidity-controlled operation cycles the dehumidification function around the chosen setting for ongoing moisture management.
Direct and pumped drainage
A direct outlet suits a drain route that can fall away from the machine. Pumped upward discharge allows water to reach a higher drain connection, with the hose route matched to the installation.
Refrigeration heat exchangers
Internally grooved copper tubing and titanium-gold coated heat exchangers form the circuit that cools the incoming air for condensation and reheats the dried air.
Reinforced mobile cabinet
The reinforced sheet-metal housing surrounds the working components. The push handle and wheeled base support repositioning without lifting the complete cabinet between nearby drying areas.
APPLICATIONS
Target damp indoor areas
Warehouses and storerooms
Reduce excess humidity around cartons, stored goods and metal items where persistent damp can damage packaging or encourage corrosion.
Workshops and equipment rooms
Control ambient moisture around stored tools, parts and equipment where condensation is a recurring concern.
Basements and underground garages
Remove moisture from enclosed below-ground spaces, with the drain route arranged for the site’s floor level and plumbing.
Enclosed construction and renovation areas
Support drying of damp room air during building work after the moisture source has been addressed.
Villas and residential storage rooms
Move the unit to rooms with recurring damp or seasonal moisture accumulation, using humidity-controlled operation for continued drying.
SELECTION
Compare capacity at the actual room condition
Use the matching temperature and humidity point
The three water-removal figures describe different inlet conditions. Compare a project against the closest temperature and relative-humidity point, then account for moisture entering through doors, ventilation and wet materials.
Check the room and drain route together
Floor area is one part of selection; room height, moisture load and airflow access also matter. Keep the inlet and outlet clear and provide a continuous route for condensate removal.
FAQ
Using the mobile unit
Why are three dehumidification rates listed?
Water removal changes with the amount of moisture available in the incoming air and with its temperature. Each figure is paired with its own stated condition in the specification table.
When is pumped drainage useful?
It is useful when the receiving drain is above the machine’s direct outlet. Select the discharge route to suit the available pump lift and hose arrangement.
PROCUREMENT / INQUIRY
Request a
product quotation.
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.