Coverage on both faces
The two legs cover the edges on either side of a right-angle junction, reducing the amount of exposed edge detail.
PRODUCT GALLERYST
Product view
Cleanroom Accessories
25 mm Aluminum Angle
Product specifications
| Brand | ST |
|---|---|
| Model | ST-XC-5018 |
| Application | Decorative edge finishing |
| Thickness | 1 mm |
| Length | 6 m per piece |
| Surface treatment | Anodizing / fluorocarbon spraying / electrophoretic coating |
| Tensile strength | ≥175 MPa |
| Proof strength | ≥130 MPa |
| Coating indentation resistance | ≥80 |
Customization availableSpecifications can be customized to your requirements.
Request a quotation
Specify the quantity and configuration in your inquiry.
25 mm Aluminum Angle finishes exposed edges and right-angle junctions with two equal legs that cover the adjoining surfaces. Its two equal legs cover the adjoining surfaces, concealing the edge detail and giving the finished corner a straight, continuous trim line.
Use the angle where a flat decorative edge cover is needed. The L-shaped section sits across the junction so both faces are finished with one profile.
FEATURES AND BENEFITS
Finish adjoining edges with one angle
Continuous finishing line
A straight angle creates a consistent trim line along the joint, helping the adjoining surfaces read as a finished corner.
APPLICATIONS
Where it is used
Panel edge finishing
Use on exposed panel edges and perpendicular returns where a flat aluminum trim is needed to complete the decorative finish.
INSTALLATION AND SELECTION
Fit the angle to the edge detail
Coverage and alignment
Position both legs flat against the adjoining surfaces, with enough coverage to conceal the edge being finished.
Finish coordination
Choose a surface treatment that suits the adjacent trim and panel finish, and keep cut ends and joints neat along the run.
FAQ
Common questions
What is the angle used for?
It provides decorative finishing at exposed edges and right-angle junctions by covering the two adjoining faces.
Are the two legs equal?
Yes. The supplied section drawing shows 25 × 25 mm legs.
PROCUREMENT / INQUIRY
Request a
product quotation.
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.