Broad cover faces
The equal legs provide coverage on each adjoining face, helping conceal the exposed edge detail beneath the trim.
PRODUCT GALLERYST
Product view
Cleanroom Accessories
35 mm Aluminum Angle
Product specifications
| Brand | ST |
|---|---|
| Model | ST-XC-5019 |
| Application | Decorative edge finishing |
| Thickness | 1.2 mm |
| Length | 6 m per piece |
| Surface treatment | Anodizing / fluorocarbon spraying / electrophoretic coating |
| Tensile strength | ≥175 MPa |
| Proof strength | ≥130 MPa |
| Coating indentation resistance | ≥80 |
Customization availableSpecifications can be customized to your requirements.
Request a quotation
Specify the quantity and configuration in your inquiry.
35 mm Aluminum Angle finishes panel corners and exposed returns with equal legs that provide a wider cover face than the 25 mm angle. Its broad trim faces cover the cut edge on both sides of the junction, helping create a neat transition between the adjoining surfaces.
The section is useful where the finishing detail needs a wider cover face. Both legs follow the right-angle return, so the same profile can finish the two faces along the full edge.
FEATURES AND BENEFITS
Cover a wider finishing detail
A consistent return
One L-shaped member follows both surfaces of the corner, keeping the visible finishing line continuous.
APPLICATIONS
Where it is used
Panel corners and returns
Use where a decorative angle must cover an exposed panel edge and extend onto both adjoining faces.
INSTALLATION AND SELECTION
Allow room for the cover faces
Coverage at the junction
Check that the angle covers the unfinished edge and that both faces can sit flat on the adjoining surfaces.
Clearance beside openings
Leave enough clearance for nearby moving parts and opening edges when positioning the broader trim faces.
FAQ
Common questions
When is the wider angle useful?
Use it when the decorative edge detail needs a broader cover face to conceal the exposed return.
Is this the same product as the 25 mm angle?
It is a separate size with its own section drawing and thickness. Select the angle that fits the coverage needed at the junction.
PROCUREMENT / INQUIRY
Request a
product quotation.
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.