500 m³/h housing
The smallest side-seal assembly keeps the ceiling face compact for a lower-flow outlet.
PRODUCT / TECHNICAL DATA Cleanroom HEPA Filtration ProductsSpecifications / Configurations / Procurement
PRODUCT GALLERYST
Product view
Cleanroom HEPA Filtration Products
Side Gel Seal HEPA Supply Terminal
Product specifications
| Brand | ST |
|---|---|
| Filter type | Side gel seal HEPA |
| Filter efficiency | ≥99.995% |
| Housing | Powder-coated cold-rolled steel |
| Assembly | Plenum, HEPA filter, diffuser plate and regulating damper |
| Installation | Ceiling suspension or recessed wall |
| Inlet options | Top or side |
| Test connections | Aerosol injection and sampling ports |
Customization availableSpecifications can be customized to your requirements.
Request a quotation
Specify the quantity and configuration in your inquiry.
Side Gel Seal HEPA Supply Terminal provides a final supply outlet with a lateral gel seal around the filter. The matching filter channel and housing edge address perimeter bypass while the plenum and diffuser distribute air through the outlet.
Aerosol injection and sampling ports provide connection points for installed-system checks. The regulating damper is used to balance the outlet against the room airflow plan.
MODELS AND DIMENSIONS
Terminal size options
| Inlet | Airflow, m³/h | Housing, mm | Filter, mm | Diffuser, mm | Damper, mm |
|---|---|---|---|---|---|
| Top inlet | 500 | 490 × 490 × 280 | 400 × 400 × 90 | 555 × 555 × 15 | 200 × 200 × 190 |
| Top inlet | 1000 | 640 × 640 × 280 | 550 × 550 × 90 | 705 × 705 × 15 | 320 × 200 × 190 |
| Top inlet | 1500 | 720 × 720 × 280 | 630 × 630 × 90 | 785 × 785 × 15 | 320 × 250 × 190 |
| Side inlet | 500 | 490 × 490 × 380 | 400 × 400 × 90 | 555 × 555 × 15 | 200 × 200 × 190 |
| Side inlet | 1000 | 640 × 640 × 380 | 550 × 550 × 90 | 705 × 705 × 15 | 320 × 200 × 190 |
| Side inlet | 1500 | 720 × 720 × 380 | 630 × 630 × 90 | 785 × 785 × 15 | 400 × 200 × 190 |
Custom configurations are available.
MODEL DIFFERENCES
Which configuration fits the task
1000 m³/h housing
The intermediate assembly increases filter and diffuser area together, rather than using the small filter at a different stated duty.
1500 m³/h housing
The broadest format needs a larger opening and coordinated access below the diffuser.
Inlet route
The top-inlet option has the shorter body; the side-inlet body provides a lateral duct connection with additional height. Select the complete inlet, housing and damper combination in the table.
FEATURES AND BENEFITS
How it helps
Matched side-seal interface
The filter frame and housing must share the same lateral sealing geometry; the seal location distinguishes this terminal from a top-seal assembly.
Test connections
Aerosol and sampling ports give access for the relevant installation test procedure without creating a separate test connection in the duct.
Removable diffuser
The room-side face opens the filter service area for planned replacement.
APPLICATIONS
Where it is used
Final room supply
Use in clean production or controlled laboratory ventilation where the installation calls for a side gel seal terminal.
CONFIGURATION
Housing, filter and airflow components
Select the components separately
The main image shows the terminal housing. Choose the matching HEPA filter, diffuser plate and regulating damper for the required configuration; the size table shows how the components fit together.
PROCUREMENT / INQUIRY
Request a
product quotation.
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.