Gas-phase contact
Ozone moves with the room air to contact exposed areas; effective treatment depends on gas distribution, concentration and contact time.
PRODUCT / TECHNICAL DATA Cleanroom Disinfection SuppliesSpecifications / Configurations / Procurement
PRODUCT GALLERYST
Product view
Cleanroom Disinfection Supplies
Mobile Ozone Generator
Product specifications
| Brand | ST |
|---|---|
| Product type | Mobile ozone generator |
| Rated voltage | 220 V |
| Cabinet material | 304 stainless steel |
| Control | Digital programmable time switch |
| Mobility | Floor-standing cabinet with castors |
| Main functions | Germicidal treatment, disinfection and odour removal |
| Treatment targets | Bacteria, viruses and fungal spores |
| Disinfection rate | 99.99% |
| Gas distribution | 360-degree diffusion through the treatment space |
| Treatment medium | Ozone gas; no added liquid disinfectant |
| Ozone decomposition | Breaks down into oxygen after generation stops |
| Cabinet properties | Corrosion, rust, acid and alkali resistance |
| Reference configuration output | 20–40 g/h |
| Customisation | Ozone output and project-specific configuration |
Customization availableSpecifications can be customized to your requirements.
Request a quotation
Specify the quantity and configuration in your inquiry.
Mobile Ozone Generator produces ozone for scheduled room disinfection and odour treatment. Ozone is a reactive gas that oxidises susceptible microorganisms and odour-causing compounds as it spreads through the treatment area. It is used in an isolated, unoccupied space after routine cleaning.
Castors let the unit move between treatment areas, while the digital time switch schedules operating periods. The 304 stainless steel cabinet resists corrosion and is easy to clean, making the unit practical for shared use across rooms without a permanent installation in each one.
MODELS AND DIMENSIONS
Ozone output options
| Ozone output (g/h) | Cabinet | Control |
|---|---|---|
| 10 | 304 stainless steel | Digital time switch |
| 20 | 304 stainless steel | Digital time switch |
| 30 | 304 stainless steel | Digital time switch |
| 40 | 304 stainless steel | Digital time switch |
| 50 | 304 stainless steel | Digital time switch |
| 60 | 304 stainless steel | Digital time switch |
| 80 | 304 stainless steel | Digital time switch |
| 100 | 304 stainless steel | Digital time switch |
| 120 | 304 stainless steel | Digital time switch |
| 150 | 304 stainless steel | Digital time switch |
| 180 | 304 stainless steel | Digital time switch |
| 200 | 304 stainless steel | Digital time switch |
Output is the mass of ozone generated per hour. Room concentration also depends on room volume, air movement and ozone consumption by surfaces.
MOBILE GAS TREATMENT
Timed treatment without liquid spraying
Scheduled operation
The time switch sets operating periods around room availability, avoiding continuous generation when treatment is not required.
One unit, multiple rooms
The wheeled cabinet can be repositioned between treatment cycles, reducing the need for a fixed generator in every room.
No liquid disinfectant dosing
Ozone is generated on site and subsequently decomposes, avoiding preparation and spraying of a liquid disinfectant for this treatment step.
APPLICATION ENVIRONMENTS
Rooms that can be isolated for treatment
Industrial workrooms
Schedule room disinfection after cleaning and outside working hours, with a treatment cycle established for the target microorganisms.
Storage and utility rooms
Treat suitable empty rooms for residual odours after the source has been removed, with ozone-compatible fittings and materials.
Vacated commercial premises
Use controlled odour-treatment cycles during building cleaning or restoration before occupants return.
OPERATING CONDITIONS
Control exposure throughout the treatment cycle
Isolate the area
Keep people, animals and plants out during operation and prevent ozone from reaching occupied adjacent spaces; inhaling ozone can injure the lungs.
Release the room after measurement
After switching off, ventilate or use the site's ozone-removal procedure and measure residual ozone before re-entry. The timer ending or the smell disappearing does not establish safe entry.
CONFIGURATION AND USE
Size the treatment for the room and its contents
Output and contact time
Select output using room volume, air movement and target concentration, then establish contact time for the organisms or odours being treated.
Materials and cleaning
Remove the contamination source and clean first; assess rubber seals, cable coatings, fabrics and other ozone-sensitive contents before treatment.
PROCUREMENT / INQUIRY
Request a
product quotation.
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.