Dimensioned swing-door cargo configuration
The 1360 × 2000 mm clear opening and 1400 × 1910 × 2020 mm internal space are for the listed double-leaf version; size the complete trolley and load within that envelope.
PRODUCT GALLERYST
Product view
Cleanroom Equipment
Cargo Air Shower
Roll-up door configuration
| Brand | ST |
|---|---|
| Configuration | Roll-up door cargo air shower |
| Enclosure | Thickened 304 stainless steel |
| Construction | Fully welded joints |
| Filtration | H13 high-efficiency air filter |
| Blower | Dedicated centrifugal blower |
| Air shower cycle | Automatic blowing |
| Detection | Infrared sensing |
| Door type | Automatic roll-up curtain |
| Curtain options | Orange or blue; transparent viewing section available |
| Door control | Electronic entrance and exit interlock |
| Controller | Intelligent control panel |
| Emergency stop | Control-panel emergency-stop button |
| Opening options | Push button, access card, fingerprint, induction loop, radar or remote control |
| Passage use | Goods, trolleys and personnel |
| Size and configuration | Custom chamber dimensions, door opening and access controls |
Customization availableSpecifications can be customized to your requirements.
Request a quotation
Specify the quantity and configuration in your inquiry.
Cargo Air Shower blows loose particles from the exposed surfaces of incoming goods and trolleys before they reach clean production. Filtered recirculation collects displaced particles within the chamber, adding a dust-removal step between storage and unpacking.
The roll-up curtain opens above the passage, leaving the approach clear of swinging doors. Electronic interlocking controls entry and exit, and the opening method can suit push-button access, authorised users or vehicle movement.
SWING-DOOR CONFIGURATION
Double-leaf cargo air shower
| Product type | Stainless steel cargo air shower |
|---|---|
| Stainless steel options | 201 or 304 |
| Dimensioned configuration | Double-leaf swing doors |
| External size (W × D × H) | 2000 × 2000 × 2100 mm |
| Internal size (W × D × H) | 1400 × 1910 × 2020 mm |
| Clear door opening (W × H) | 1360 × 2000 mm |
| Power | 2.2 kW |
| Air nozzles | 24 adjustable-angle nozzles in 201 or 304 stainless steel |
| Filtration | 2 high-efficiency air filters |
| Lighting | 2 lamps |
| Doors and floor | 201 or 304 stainless steel |
| Door glazing | Upper and lower tempered-glass viewing panels on the double-leaf doors |
| Door options | Double-leaf swing doors; sliding doors; roll-up doors |
| Activation | Infrared sensing with automatic air shower cycle |
| Door control | Entrance and exit door interlock; automatic door closers on swing doors |
| Control panel | Intelligent controller with cycle-time display, operating status and voice prompts |
| Air circulation | Internal recirculation through return-air grilles |
| Blower | Dedicated high-airflow air-shower blower |
| Operation | Power-on ready operation |
| Control system warranty | 3 years |
| Blower warranty | 10 years |
MODELS AND DIMENSIONS
Personnel configurations
| Configuration | Material | External size | Internal size | Clear opening | Power | Nozzles |
|---|---|---|---|---|---|---|
| 1 person, single-side blowing | 201 / 304 stainless steel | 1200 × 1000 × 2100 | 800 × 910 × 1980 | 760 × 1960 | 1.1 kW | 6 |
| 1 person, double-side blowing | 201 / 304 stainless steel | 1400 × 1000 × 2100 | 800 × 910 × 1980 | 760 × 1960 | 1.1 kW | 12 |
| 2 persons, double-side blowing | Cold-rolled steel exterior; stainless steel interior | 1400 × 1500 × 2100 | 800 × 1410 × 1980 | 760 × 1960 | 2.2 kW | 18 |
| 3 persons, double-side blowing | Cold-rolled steel exterior; stainless steel interior | 1400 × 2000 × 2100 | 800 × 1910 × 1980 | 760 × 1960 | 2.2 kW | 24 |
Cargo passages are sized around the loaded trolley or goods; personnel configurations are listed separately above.
MODEL DIFFERENCES
Which configuration fits the task
Roll-up cargo configuration
The curtain opens overhead to leave the approach clear; its chamber and opening are configured to the load rather than copied from the swing-door dimensions.
One-person single-side configuration
The 1200 mm external width accommodates one blowing side and six nozzles, providing the narrower personnel enclosure.
One-person double-side configuration
The 1400 mm external width provides two blowing sides and twelve nozzles while retaining the same listed single-person chamber.
Two-person configuration
The internal depth increases to 1410 mm with eighteen nozzles, providing more space along the entry direction.
Three-person configuration
The 1910 mm internal depth and twenty-four nozzles extend the personnel passage for the listed three-person arrangement.
APPLICATIONS
At goods and personnel entrances
Cleanroom material entrances
Blow loose dust from incoming containers and goods before they move into the clean area.
Production supply rooms
Provide a cleaning stop for loaded trolleys moving from support areas into controlled production.
Clean packing and assembly rooms
Reduce surface dust carried in on supply containers, with a personnel configuration available for staff entrances.
OPENING OPTIONS
Choose how the door opens
Push button
Open the door directly from a nearby control.
Access card
Use card-based access for authorised users.
Fingerprint
Identify authorised users at the entrance.
Induction loop
Detect vehicles or suitable metal loads approaching the passage.
Radar
Open automatically when approaching movement is detected.
Remote control
Operate the door from a distance.
KEY FEATURES
Built for repeated material transfer
H13 air filtration
Capture particles from the airflow during the cleaning cycle.
Fully welded stainless enclosure
Continuous welded joints strengthen the enclosure, while stainless surfaces are easy to wipe clean.
Clear approach to the passage
The curtain rolls upward, giving trolleys and goods room to approach the opening.
PASSAGE SIZE
Allow room for the complete load
Opening and chamber space
Size the opening for the loaded trolley and leave space inside for the doors to close and air to reach the goods.
PROCUREMENT / INQUIRY
Request a
product quotation.
Tell us the quantity and configuration you need. This product will be included automatically.
Fields marked * are required.